Patton SN5704/1E30V/EUI - Image 1
Patton SN5704/1E30V/EUI - Image 2
Patton SN5704/1E30V/EUI - Image 3
Patton SN5704/1E30V/EUI - Image 4

Patton SN5704/1E30V/EUI Documents

SKU: PAT-SN5704-1E30V-EUI

Patton SN5704/1E30V/EUI

Login to view prices

MSRP: $3,931.00

Patton SN5704/1E30V/EUI SmartNode LTE/GSM VoIP Gateway + SBC with 4 VoLTE ports | One (1) T1/E1 PRI, 30 VoIP Calls, and two (2) SIP-SIP calls (SIP b2b UA) upgradeable (max. 128).  Comes with 2x Antenna Dual NIC.

SKU: PAT-SN5704-1E30V-EUI

You may also like…

Description

The SN5700 Series is a VoLTE Gateway, VoIP Gateway, Session Border Controller & Survivability appliance that delivers reliable, secure, and agile voice connectivity. The device enables internetworking and interoperability of VoIP/SIP with LTE mobile voice+SMS, as well as PSTN Trunks and legacy End Points. The wireless interfaces are backward compatible with 2G (GSM) and 3G (UMTS) connections. The unit can be ordered with or without telephony ports and can support various densities and mixes of Analog FXS, FXO, ISDN T1/E1 and ISDN BRI. As a SIP Session Boarder Controller, the SN5700 offers SIP compatibility between various IP PBX systems, SIP trunks and end points. Transcoding ensures conversion of TCP to UDP, RTP to SRTP and adaptation between different voice codecs. The device supports up to 128 simultaneous SIP-to-SIP B2BUA sessions and up to 32 transcoded sessions. SIP communication is secured by separating internal and external SIP network domains, topology hiding, SIP-DDoS Detection & Protection, Firewall Access Control List (ACLs) and SIP Header Manipulation. SIP communication is secured by separating internal and external SIP network domains, topology hiding, SIP-DDoS Detection & Protection, Firewall Access Control List (ACLs) and SIP Header Manipulation. Because local SIP calls can be directly routed over LTE, SIP systems can be deployed in locations where there is no Broadband or Internet connectivity. A local VoIP/SIP or legacy telephony system can be deployed anywhere you can get a cell phone signal. The SN5700 can be used for very cost-effective POTS Replacement since it can deliver local POTS connections and dial tone using any mobile voice service for PSTN connectivity.

Core Features:

  • One (1) T1/E1 PRI
  • 30 VoIP Calls
  • Two (2) SIP-SIP calls (SIP b2b UA) upgradeable (max. 128)
  • Comes with 2x Antenna Dual NIC
  • Voice Over LTE
  • All-In-One eSBC
  • LTE Failover
  • SIP without Internet
  • Least Cost Routing
  • Superior SIP Interoperability
  • Easy POTS Replacement
  • Cyber Secure Telephony
  • Next-Gen GSM Gateway
  • Transcoding

*NOTE: – This product does NOT run Trinity Software and is not currently powered by the Patton Cloud.

Additional information

Weight 3.3 lbs
Dimensions 12.80 × 8.66 × 3.15 in
Brand

Patton
Device Ports

T1
Number of Ports

1 T1

GENERAL INFO:

  • Model: SN5704/1E30V/EUI
  • Wireless and LTE Interfaces:
    • 2, 4 or 6 LTE Ports (2, 4 or 6 SIM cards)
    • 2G (GSM) / 3G (UMTS) / 4G (VoLTE)
    • 2G Bands: B3(1800), B8(900)
    • 3G Bands: B1(2100), B8(900)
    • 4G Bands: B3(1800), B7(2600), B20(800), B1(2100), B8(900)
    • SMS and Concatenated SMS (Text and PDU)
    • Supplementary LTE services (CLIP, CLIR)
    • Shipped with 14 cm stock antennas. Optional antennas with 2,5 m cable and magnetic foot
  • Ethernet Interfaces:
    • Two (2) 10/100 Copper Ports
    • One (1) Ethernet LAN and One (1) Ethernet WAN
  • Telephony Interfaces:
    • Options: 4 FXS ports, 4 FXO ports, 2 BRI and 2 FXS ports, 4 BRI ports or 1 ISDN PRI ports
    • ISDN: Connects SIP with ISDN. ISDN Ports separately as TE or NT mode switchable in software/ Termination
      resistors (100 Ohm) for every port separately configurable
    • Analog FXO: Layer 2 is Q.921 and Layer 3 is Q.931 (Euro-ISDN DSS1) compatible. DSS1, CLIP/No-Screening, CLIR,
      COLP, UUS, MCID, CD, CNIP AOC-D. Q.SIG CNIP.
    • Analog FXS : Connects SIP to analog for connection to the public telephone network or to an internal analog
      port of the PBX. Flash hook, CLIP, CNIP. Extends analog devices to SIP (telephone, fax, alarm system, EC cash).
      Hold, Retrieve, Transfer / MWI (Stutter, FSK). CLIP, CNIP.
    • SIP user agent IETF RFC3261 compatible. SIP over UDP/TCP with optional TLS 1.2 support, SRTP
      Codecs: G.723.1 and Annex A, G.729 a/b, G.726, (up to 4 channels). G.711 including echo cancellation
      (G.168/G.165, 128ms)
    • Voice activity detection / comfort noise generation
    • DTMF digit detection and generation
  • Environmental:
    • Power supply: 110-230V, operating 12V DC at 2A
    • Average power consumption: 6 Watts (24 Watts maximum)
    • Dimensions: M – 168 x 170 x 42 mm, L – 218 x 170 x 42 mm
    • Weight: M – 800g, L – 1000g
    • Storage temperature: -20° to 70°C, operating temperature: 0° to 70°C
    • Humidity: up to 90%, non-condensing
    • Mounting: 1U, optional available: 19“rack brackets, wall-mountable

For a full list of specifications, please refer to the product datasheet