Patton FF-E1-SFP - Image 1
Patton FF-E1-SFP - Image 2
Patton FF-E1-SFP - Image 3

Patton FF-E1-SFP Documents

SKU: PAT-FF-E1-SFP

Patton FF-E1-SFP

Login to view prices

MSRP: $1,072.00

Patton FF-E1-SFP Forefront E1 TDMoIP Gateway SFP Module | Plug and Play. 120-ohm balanced, RJ45 connector. Industrial Grade -40/+85C

SKU: PAT-FF-E1-SFP

You may also like…

Description

The ForeFront FF-T1E1-SFP is an innovative TDM-over-IP Gateway packaged in an SFP module. The device is a new, convenient and easy way to transport T1/E1 (DS-1) across an Ethernet network.

The unit utilizes the SAToP (RFC4553) protocol to convert T1/E1 data into a single stream of Ethernet packets (Pseudowire). The units can be used in pairs or with other SAToP devices.

Core Features:

  • Forefront E1 TDMoIP Gateway SFP Module
  • Plug and Play
  • 120-ohm balanced
  • RJ45 connector
  • Industrial Grade -40/+85C
  • E1 Support
  • Interoperable – Interoperates with other SAToP E1/T1 equipment.
  • Diverse Applications
  • Optional API
  • Industrial Design

Additional information

Weight 1 lbs
Dimensions 8 × 8 × 4 in
Brand

Patton
Accessory Type

SFP Modules
MODEL FF-E1-SFP
MSA TO T1 INTERFACE • Reception and validation of packets from the hosting system via the electrical Gigabit Ethernet interface
• Decapsulation of the SAToP data blocks from the valid received packets
• Delay buffer management, packet sequencing and clock recovery
• Generation of the T1 bit stream using the configured clock recovery method
• Transport of the T1/E1 signal on the RJ45 interface
MANAGEMENT The FF-T1E1-SFP can only be used as a plug-and-play device
ABSOLUTE SUPPLY VOLTAGE 0-4.0 Vcc max
OPERATING TEMPERATURE -40 – 85°C
RELATIVE HUMIDITY 5-85 % Non-condensing
BIT RATE 1.25 Gb/s typical
TRANSMISSION DISTANCE 100m maximum
OPERATING VOLTAGE 3.135-3.47 Vcc
POWER SUPPLY CURRENT 318 mA typical, 345 mA maximum
POWER CONSUMPTION 1.05 W typical, 1.3 W maximum
ESD (HIGH SPEED PINS) 1000 V
ESD (PINS) 2000 V
INSULATION (AC RMS) 1000 V
MSA RX/TX DIFFERENTIAL IMPEDANCE (1-100MHZ) 100 Ohms
MSA TX DIFFERENTIAL DATA INPUT SWING 500-1200 mV (Input at Pins 18 & 19)
MSA RX DIFFERENTIAL DATA OUTPUT SWING 400 mV minimum, 800 mV typical 1200 mV maximum (Output at Pins 12 & 13)
MSA TX DATA OUTPUT RISE/FALL TIME 260 ps (20%~80% values)
For a full list of specifications, please refer to the product datasheet