Patton CL2386R/SP/EUI - Image 1
Patton CL2386R/SP/EUI - Image 2
Patton CL2386R/SP/EUI - Image 3
SKU: PAT-CL2386R-SP-EUI

Patton CL2386R/SP/EUI

Login to view prices

MSRP: $2,323.00

Patton CL2386R/SP/EUI CopperLink Long Range Hybrid Copper-Fiber Ethernet Extender | Six (6) RJ-45 local Ethernet LAN Ports, Two (2) gigabit Ethernet WAN SFPs, Two (2) 1-Pair (2-Wire) line interfaces (for Local, Remote, Repeater or Multi-Point installation), plus digital input, and output contacts. Primary Surge Protection included. 110-230 External AC Power.

SKU: PAT-CL2386R-SP-EUI

You may also like…

Description

The Patton CL2380R Series is an Ethernet Extender, Switch and Router that delivers high speed connectivity for Ethernet-over-Copper, Fiber or both. Offering 8 Ethernet Ports including 6 LAN and 2 SFP WAN ports together with Northbound and Southbound facing Long-Range Extension ports, the CL2380R is ideal for integrating local copper-based industrial ethernet to regional fiber backbones. The unit offers six (6) RJ-45 local Ethernet LAN Ports, two (2) gigabit Ethernet WAN SFPs ports, two (local/remote, north/south) long-range copper extension ports, plus digital input, and digital output ports for controlling industrial devices, sensors, alarms, or controls. As a combination Ethernet Extender, Ethernet Switch and Ethernet Router, the units offer Layer 3 capabilities supporting IP protocols required for routing, management and security required for critical industrial infrastructure. A special relay switch between the two Copper Extension ports (local/remote, north/south) enables the unit to be bypassed (directly connects the copper lines) if the unit is shut down. A Digital Output interface is used as an Alarm Relay indicating the power status of the unit. When the unit is powered OFF, this relay is closed (Alarm mode) and when the unit power is ON, this relay is open. Digital Inputs support dry-contact mode, where the absence of voltage corresponds to zero (o) and a voltage of 5V to 15V DC corresponds to 1. The Digital Input can be used for a variety of purposes subject to future or customized firmware releases. Security is enhanced with a laundry list of cyber features including firewall filtering, IPSec tunneling (with IKEv2 and Hub-and-Spoke functions), Simple Certificate Enrollment Protocol (SCEP), X.509 authentication and PKI enrolment. It embeds a Secure-Element for enhanced authentication certificate control, strong encryption of stored information and Secure-Boot to ensure total security of both data and software.

Core Features:

  • Six (6) RJ-45 local Ethernet LAN Ports
  • Two (2) gigabit Ethernet WAN SFPs
  • Two (2) 1-Pair (2-Wire) line interfaces
    • For Local, Remote, Repeater or Multi-Point installation
    • Plus digital input, and output contacts.
  • 110-230 External AC Power
  • Primary Surge Protection included
  • Copper and Fiber
  • High Speed Transport
  • All Topologies
  • Long Range
  • QoS Traffic Prioritization
  • Packet Forwarding
  • Cyber Secure
  • Ethernet & Digital I/O
  • Configuration & Management
  • Ruggedized
  • Flexible Mounting

Additional information

Weight 2.87 lbs
Dimensions 11.02 × 5.91 × 2.76 in
Brand

Patton
  • Model: CL2386R/SP/EUI
  • Copper Transport Interfaces:
    • Two RJ-45 (120 Ohms) Composite Line Interfaces.
    • Local and Remote (for Point to Point) and Eastbound and Westbound for other topologies.
    • Supports line rates from 192 kbps to 15.4 Mbps.
  • Ethernet Backbone Interfaces:
    • 2x Gigabit Ethernet SFP receptacles (Ethernet WAN) for short haul multi-mode or long-haul single mode fiber SFPs.
  • Local Ethernet Interfaces:
    • 6x 10/100 RJ-45 Copper Ethernet ports (Ethernet LAN).
    • MDI/MDIX automatic detection.
    • 16K MAC address memory and 2 MB Ethernet frame buffer.
  • Switching and Traffic Control:
    • Supports IPv4, IPv6, Static Routing, GRE, IPSec VPN with Ike v2, Hub-and-Spoke, DHCP,
      and DNS. 802.1p, VLAN/DSCP, rate limiting QoS, 802.1X Authentication, 802.1Q, per port VLANs,
      802.1ab LLDP, STP, RSTP, 802.1D Resiliency and 1,524 bytes frame size.
  • Digital I/O:
    • 1x digital input and 1x dry contact relay output 48Vdc/0.1A max.
  • Distances:
    • Based on no noise conditions using AWG26/0.4mm (See Table on the Image Section)
  • USB Host Port:
    • Local console port for Configuration and firmware updates.
    • CLI, web server, memory card for configuration backup and firmware updates, event log memory.
  • LED Indicators:
    • Power (administration in progress).
    • Composite Line synchronization (2).
    • Link/Act connection and traffic activity on the Ethernet interfaces (2).
    • Ethernet interface speed (2).
    • TD/RD data transmission on the serial interface (1).
  • Configuration & Management:
    • CLI, HTTP, SSH, HTTPS, FTP, Web GUI. Command Line via SSH and local USB console port.
    • Dying Gasp. SNMP V1, V2, V3. Radius (web and SSH authentication), LLDP, SCEP, X509 certificate management.
  • Security:
    • SecureBoot (secure element with strong encryption of stored data).
  • Diagnostics:
    • Syslog, Ping and traceroute interface and protocol diagnostics.
  • Power Input:
    • 110-230 External AC Power
    • Primary Surge Protection included
  • Environmental:
    • Metal enclosure with Desktop, DIN rail and 19” mounting options.
    • IP-40 Protection (like NEMA 1)
  • Physical:
    • Dimensions 280 x 150 x 70 mm. Weight : 1.3 kg
  • Temperature:
    • Operating: -20 to +60 °C, fan less. Relative Humidity: 90% non-condensing.