Patton CL1212E/EUI-2PK - Image 1
Patton CL1212E/EUI-2PK - Image 2

Patton CL1212E/EUI-2PK Documents

SKU: PAT-CL1212E-EUI-2PK

Patton CL1212E/EUI-2PK

Login to view prices

MSRP: $905.52

Patton CL1212E/EUI-2PK Extended Temperature CopperLink High Speed Auto Rate Extender Kit (Local and Remote); 2 x 10/100BaseTX; RJ45 Line Connector; 100-240VAC

SKU: PAT-CL1212E-EUI-2PK

You may also like…

Description

Combining data flows from up to four network-enabled devices onto a single twisted pair or coax cable, the Model 1212E can deliver IP traffic up to 1.8 miles (3 km) away—well beyond the standard 328-foot (100-meter) Ethernet distance limitation. With achievable line rates up to 168 Mbps, the CopperLink 1212E eliminates the bandwidth constraints commonly experienced with other copper-based transmission technologies. The Model 1212E is engineered to re-use existing infrastructure previously employed in legacy applications including alarm circuits, E1/T1 circuits, RS-232, RS-422, RS-485, CCTV and CATV. Many newer cabling standards are also supported, including Cat 5e, Cat 6 and Cat 7. A built-in 2-port Ethernet switch makes the CopperLink Model 1212E ideal for delivering simultaneous connectivity to more than one IP enabled device such as a laptop, a motion sensor, or even a few high resolution IP video cameras— all over a single twisted-pair!

Core Features:

  • Extended Temperature CopperLink High Speed Auto Rate Extender Kit (Local and Remote)
  • 2 x 10/100BaseTX
  • RJ45 Line Connector
  • 100-240VAC
  • Ethernet Extension
  • Operates Over Twisted Pair
  • Plug and Play
  • Multiple Line Rates Supported
  • Transparent LAN Bridging
  • Made in the USA

Additional information

Weight 1 lbs
Dimensions 1.18 × 4.28 × 3.36 in
Brand

Patton

GENERAL INFO:

  • Model: CL1212E/EUI-2PK

COPPERLINK LINE INTERFACE:

  • RJ-45 (pin 4 = ring; pin 5 = tip)
  • BNC 75-ohm coax
  • Terminal block, 2 position

COPPERLINK LINE MODULATION:

  • DMT (Discrete Multi-Tone)

ETHERNET INTERFACE (x2):

  • 8-position, shielded RJ-45. Auto-sensing 10/100Base-TX with half or full duplex operation.
    Model 1211E has one 10/100Base-TX port.

PROTOCOL:

  • Transparent to high layer protocols:
    • supports 802.1Q VLAN tagged or untagged frames.
  • Transparent to IP Video schemes:
    • fully transparent to such compression schemes as MPEG-4, H.264, and MJPEG.

TARGET SNR MODES:

  • 6 dB and 9 dB

MANAGEMENT:

  • 8-position DIP switch

MONITORING:

  • 6 LEDs display status for the following:
    • Pwr (Power)
    • Line
    • Eth (Ethernet) 0 & Eth 1
    • R (Remote)
    • L (Local)

POWER SUPPLY:

  • External AC: 100–240 VAC

COMPLIANCE:

  • FCC Part 15A
  • CE Mark
  • EMC Directive 89/336/EEC
  • Low-Voltage Directive 73/23/EEC

ENVIRONMENT:

  • Temperature:
    • -4 to 158°F (-20 to 70°C)
  • Humidity:
    • 5 to 85%, condensing

For a full list of specifications, please refer to the product datasheet