CyberData 011579 Documents
You may also like…
- Description
- Additional information
- Technical Specifications
Description
Description
The SIP Paging 25V/70V Amplifier is an analog/IP hybrid, cost-effective paging solution. It allows customers to use CyberData’s or their existing 70V, 25V, constant voltage speakers, and/or CyberData multicast endpoints in a VoIP environment. The SIP Paging 25V/70V Amplifier sends and receives multicast, including from any channel of Poly phones. The SIP Paging 25V/70V Amplifier has a built-in calendar based scheduler that enables scheduled bells and prerecorded messages to be sent to different multicast zones as well as to a single analog zone. Multiple analog zones can be supported by adding additional SIP Paging 25V/70V Amplifiers.
Core Features:
- Supports one analog zone with hundreds* of 25V or
70V speakers/horns with a single home run cable to the Amplifier. - Calendar based bell scheduler
- Support for security code to prevent unwanted paging access
- Supports 100 DTMF controlled paging groups, that can transmit audio
via multicast and the single analog channel - Can page to unlimited endpoints that are enabled to
receive multicast or Poly pages on any Poly channel - Can receive pages directly from Poly phones as well as other devices that can send standard multicast
- Supports call-in stored message recording
- Paging prioritization
- Loud/Night Ringer function – second SIP extension
- Supports delayed pages, i.e. call buffering
- Supports multiple user accounts
- Master analog volume adjustment via web interface or front panel LCD controls
- Fault sense input
- Line-in for background music
- Line-out connector
- NTP-based internal clock with battery back-up
- LCD display for monitoring device status, configuration and diagnostics
- Configurable alerts for amplifier temperature threshold, protection, and recovery modes.
- 19-inch rack mountable with removable rack ears
- TLS 1.2 and SRTP enhanced security for IP Endpoints in a local or cloud-based environment
- HTTPS web based configuration
- Support for Cisco SRST resiliency
- Auto-provisioning via HTTPS, HTTP or TFTP
- Configurable event generation for device health and status monitoring
- 802.11q VLAN tagging
Additional information
Additional information
Weight | 17.8 lbs |
---|---|
Dimensions | 16.85 × 10.83 × 2.25 in |
Brand | CyberData |
Paging Unit Type | Amplifier |
Technical Specifications
GENERAL INFO:
- Model: 011579
- Ethernet I/F: 10/100 Mbps
- Protocol: SIP RFC 3261 Compatible
- Power Input:
- AC Voltage Input 100‐240VAC, 50/60 Hz
- Compliance:
- CE: EMC Directive – Class A EN 55032
& EN 55024, LV Safety Directive –
EN 62368-1; RoHS Compliant;
FCC Part 15 Class A;
Industry Canada ICES-3 Class A;
IEEE 802.3 Compliant; TAA Compliant
- CE: EMC Directive – Class A EN 55032
- Warranty: 2 Years Limited
Analog Zone Output:
- Continuous power output of up to 392W
when driving 70V distributed
speakers, equivalent load > 12-Ohms - Continuous power output of up to 160W
when driving 25V distributed
speakers, equivalent load > 4-Ohms.
Line In:
- Input Signal Amplitudes: 2.0 VPP maximum
- Input Impedance: 10k Ohm
Line Out:
- Output Signal Amplitudes: 2.0 VPP maximum
- Output Level: +2dBm nominal
- Total Harmonic Distortion: 0.5% maximum
- Output Impedance: 10k Ohm
For a full list of specifications, please refer to the product datasheet